Each job has a different hazard depending on how the initial implementation and attention to equipment and units are used, whether in good condition or unfit for use. In addition to the importance of knowing the dangers at work, also required accuracy in the inspection unit or working tool both vehicles, machinery, equipment or used heavy equipment.
Failure of lifting equipment and conveyance work like Crane, Forklift, Overhead Cranes, Lifting Bucket, Gondola and adopted tools such as web slings, shackles or chain block can result in serious accidents can even result in fatality.
Failure of lifting equipment and conveyance work like Crane, Forklift, Overhead Cranes, Lifting Bucket, Gondola and adopted tools such as web slings, shackles or chain block can result in serious accidents can even result in fatality.
Therefore inspections of lifting equipment and transport is essential, either daily or monthly. Note repairs must be carried out continuously, since this is very important, as you may know little damage to equipment or work units that are used early on.
In general items that should be checked regularly and included in the check list such as:
1. Daily InspectionIn
a Logbook is done to check the function fork, Telescopic Boom Crane,
tool path (wheels, tires or chains), Leaks Hydraulic System, Function
indicator panels, lights, brakes and engine. Whereas For Monthly checks can be more focused on engine parts (replacement of oil or electricity).
2. Annual InspectionAnnual inspection must be done by implementing Lift and Transport Equipment Certification by the Department of Labour to meet existing regulations.
3. Notes repair / service must be recorded and documented so that any damage that have occurred can be known.
4. Inspection aids such as chain lifting block, shackle, web sling and steel rope should also be conducted on a regular basis.
- Chain block, perform the checks on the chain and hook if there are any cracks as well as a locking device is still functioning and provide lubrication when sdh rusty chain.
- Shackle lock or seal, perform the checks on the threaded bolt lock and periodic inspections for cracks in the seal.
- Web sling, perform the checks if there is tearing at the fabric of the fabric and adjust the applicable standards.
- Steel Ropes / slings, perform the checks on the steel wire braid is found broken or not and adjust to the applicable standards and do not forget to save chain block and steel ropes by hanging.
If finding unsafe conditions on the machine / lift and transport immediately report to his superiors, colleagues also remember safety is our responsibility. So special attention is needed to prevent the dangers that occur when the use of equipment and units used.
2. Annual InspectionAnnual inspection must be done by implementing Lift and Transport Equipment Certification by the Department of Labour to meet existing regulations.
3. Notes repair / service must be recorded and documented so that any damage that have occurred can be known.
4. Inspection aids such as chain lifting block, shackle, web sling and steel rope should also be conducted on a regular basis.
- Chain block, perform the checks on the chain and hook if there are any cracks as well as a locking device is still functioning and provide lubrication when sdh rusty chain.
- Shackle lock or seal, perform the checks on the threaded bolt lock and periodic inspections for cracks in the seal.
- Web sling, perform the checks if there is tearing at the fabric of the fabric and adjust the applicable standards.
- Steel Ropes / slings, perform the checks on the steel wire braid is found broken or not and adjust to the applicable standards and do not forget to save chain block and steel ropes by hanging.
If finding unsafe conditions on the machine / lift and transport immediately report to his superiors, colleagues also remember safety is our responsibility. So special attention is needed to prevent the dangers that occur when the use of equipment and units used.
0 Response to "Tips Inspection Equipment"